- Single-aisle airliner, M=0.8, excs on most components
- Low speed commuter, M=0.43, lower port wing excs
- Debug example 1, check the JSON for details
- Debug example 2, check the JSON for details
- Single-aisle airliner, M=0.8, exc on all components
- Single-aisle airliner, M=0.8, plate on port wing, lower, plate 4 steps
- Single-aisle airliner, M=0.78 and no exc specified
- Low speed commuter, M=0.43, inspection panels
- Single-aisle airliner, M=0.8, exc on all components, British units
- The Kitchen Sink
- Further debug 1
v=1.0.240927
Aircraft selection and details
Select a units system and an aircraft type, then click 'Continue'. ASTEROID will be configured according to your choices.
ASTEROID setup complete for an aircraft type of ''. You can now add excrescences to the wings, nacelle, tailplanes, fin and fuselage on the appropriate tabs, above. You can select a different freestream Mach number (if available) at any time.
To re-set ASTEROID click on the 'Clear' button and enter the "Aircraft selection and details" again.
Notes
Wings: Port
Wings: Starboard
No wing sketches or data are available for the '{{tba.rt.planform.prompt}}' aircraft type.
Nacelle
Nacelle
No nacelle sketches or data are available for the '{{tba.rt.planform.prompt}}' aircraft type.
Tailplane: Port
Tailplane: Starboard
No tailplane sketches or data are available for the '{{tba.rt.planform.prompt}}' aircraft type.
Fin
No fin sketches or data are available for the '{{tba.rt.planform.prompt}}' aircraft type.
Fuselage
Fuselage
No fuselage sketches or data are available for the '{{tba.rt.planform.prompt}}' aircraft type.
Load data
DEBUG
JSON data node
{{tba.data | json}}
All JSON
{{tba | json}}