The details of the last six ESDU Data Releases and the current MMDH Supplement are listed below.

• 24001 : Spinning
  New.
  Series: Performance
  Other collections: Aerospace Package
• MMPDS-2024 Volume II : Metallic Materials Properties Development and Standardization (MMPDS):
  Volume II: Process Intensive Materials and Joining Technologies
  New.
  Series: none
  Other collections: MMPDS
• TM 218 : An example of air data pressure correction with a dependency on engine power settings
  New.
  Series: Performance
  Other collections: Aerospace Package
• TM 5 : ESDU TECHNICAL MEMORANDUM
  Correlations for the aerodynamic characteristics of aerofoils in compressible inviscid flow
  New.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Aerofoils and Wings Segment
• 06014 : Zero-lift drag coefficient increment due to full-span plain flaps.
  Updated to Amendment A. New/Modified ESDUpac program. New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Controls and Flaps Segment
• 06020 : Computer program for estimation of aerofoil characteristics at subcritical speeds: Lift-curve slope, zero-lift incidence and pitching moment, aerodynamic centre and drag polar minimum
  Updated to Amendment A.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Aerofoils and Wings Segment
• 11004 : Decelerating forces on multiple-wheel undercarriages rolling or braking on precipitate contaminated runways
  Updated to Amendment E.
  Series: Performance
  Other collections: Aerospace Package
• 11005 : Prediction of near-field and far-field harmonic noise from subsonic propellers with axial or non-axial inflow
  Updated to Amendment C.
  Series: Vibration and Acoustic Fatigue, Aircraft Noise
  Other collections: Aerospace Package, Aerostructures Package
• 23002 : Tyre braking on dry or water-covered runways - summary of ESDU tyre-runway modelling
  Updated to Amendment B.
  Series: Performance
  Other collections: Aerospace Package
• 67023 : Geometric stress concentrations. Two equal unreinforced circular holes in infinite flat plates.
  Updated to Amendment B. New Interactive Graphs.
  Series: Structures, Stress and Strength, Fatigue - Endurance Data
  Other collections: Structures Design Collection, Aerospace Package, Aerostructures Package, Nuclear Engineering Package, Nuclear Plant Mechanical/Structural Design, Stress Concentrations Segment, Automotive Collection
• FAT E.07.01 : Endurance of aluminium alloys (unclad) (in bending).
  Updated to Amendment C.
  Series: Fatigue - Endurance Data
  Other collections: Aerospace Package, Aerostructures Package, Automotive Collection
• MMPDS-2024 Appendices A-E : Metallic Materials Properties Development and Standardization (MMPDS):
  Appendices A-E
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 1 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 1 - INTRODUCTION
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 2 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 2 - STEEL ALLOYS
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 3A : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 3A - ALUMINUM ALLOYS
  General through 2000 Series
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 3B : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 3 - ALUMINUM ALLOYS
  3000 through 7000 Series
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 3C : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 3 - ALUMINUM ALLOYS
  Cast Alloys and Element Properties
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 4 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 4 - MAGNESIUM ALLOYS
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 5 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 5 - TITANIUM ALLOYS
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 6 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 6 - HEAT-RESISTANT ALLOYS
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 7 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 7 - MISCELLANEOUS ALLOYS AND HYBRID MATERIALS
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 8 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 8 - STRUCTURAL JOINTS
  Re-issue 2024.
  Series: none
  Other collections: MMPDS
• MMPDS-2024 Chapter 9 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 9 - GUIDELINES
  Re-issue 2024.
  Series: none
  Other collections: MMPDS

• 21005 : Summary of Data Items on Controls
  Updated to Amendment A.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Controls and Flaps Segment
• 70015 : Fluid forces and moments on flat plates.
  Updated to Amendment C. New Interactive Graphs.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Aerofoils and Wings Segment

• 23010 : Aircraft tyre in linear motion braking on water-covered runway:
  Application of ESDU 23002
  New.
  Series: Performance
  Other collections: Aerospace Package
• 23011 : Ground-test machine operating on water-covered runway surface:
  Application of ESDU 23002
  New.
  Series: Performance
  Other collections: Aerospace Package
• 23013 : Viscous full-potential (VFP) method for three dimensional wings and wing-body combinations
  Part 5: Estimation of excrescence drag at subsonic speeds and analysis program
  New.
  Series: Transonic Aerodynamics
  Other collections: Aerospace Package, ASTEROID Collection
• TM 214 : ESDU TECHNICAL MEMORANDUM:
  The estimate of effect of a wing rear spar repair to a single aisle aircraft on aerodynamic performance
  New.
  Series: Transonic Aerodynamics
  Other collections: Aerospace Package, ASTEROID Collection
• TM 216 : ESDU TECHNICAL MEMORANDUM
  Derivations of equations for profile drag increment conversion factors for part-span flaps
  New.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Controls and Flaps Segment
• TM 217 : ESDU TECHNICAL MEMORANDUM
  Gust Analysis
  New.
  Series: Fatigue - Endurance Data
  Other collections: Aerospace Package, Aerostructures Package
• 13012 : Viscous full-potential (VFP) method for three-dimensional wings and wing-body combinations.
  Part 2: Use of VFPHE and related programs.
  Updated to Amendment B. New/Modified VIEWpac program.
  Series: Transonic Aerodynamics
  Other collections: Aerospace Package
• 76008 : Drag of transverse rows of spherically-headed rivets immersed in a turbulent boundary layer at subsonic and supersonic speeds
  Updated to Amendment A. New/Modified ESDUpac program. New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 86013 : Guide to the use of Data Items on the fatigue strength of welded joints in steels.
  Updated to Amendment B.
  Series: Stress and Strength
  Other collections: Aerospace Package, Aerostructures Package, Nuclear Engineering Package, Nuclear Plant Mechanical/Structural Design, Analysis of Joints (Bolted, Bonded and Welded) Segment, Automotive Collection
• AERO F.02.01.07 : Conversion factor for profile drag increment for part-span flaps.
  Updated to Amendment D.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Controls and Flaps Segment
• 70012 : Lift-curve slope and aerodynamic centre position of wings in inviscid supersonic flow.
  New/Modified ESDUpac program. New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Aerofoils and Wings Segment

• TM 213 : ESDU TECHNICAL MEMORANDUM
  Curve fits to the Spalding and Chi mean and local skin friction data
  New.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Aerofoils and Wings Segment
• TM 215 : ESDU TECHNICAL MEMORANDUM
  Comments on doublers used to reduce stress in riveted panels
  New.
  Series: Vibration and Acoustic Fatigue
  Other collections: Aerospace Package, Aerostructures Package
• 68020 : The compressible two-dimensional turbulent boundary layer, both with and without heat transfer, on a smooth flat plate, with application to wedges, cylinders and cones
  Updated to Amendment E.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Aerofoils and Wings Segment
• 76033 : Subsonic base drag of cylindrical bodies with conical boat-tails.
  Updated to Amendment C. New Interactive Graphs. New/Modified ESDUpac program. New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 77020 : Subsonic pressure drag of conical boat-tails.
  Updated to Amendment B. New/Modified ESDUpac program. New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 23002 (since amended ~ see current version) : Tyre braking on dry or water-covered runways - summary of ESDU tyre-runway modelling
  Amendment A.
  Series: Performance
  Other collections: Aerospace Package

• 81007 : Fatigue strength in bending of steel I-beams with welded attachments.
  Updated to Amendment A.
  Series: Stress and Strength
  Other collections: Aerospace Package, Aerostructures Package, Nuclear Engineering Package, Nuclear Plant Mechanical/Structural Design, Analysis of Joints (Bolted, Bonded and Welded) Segment, Automotive Collection
• 94036 : The prediction of sound attenuation as a result of propagation close to the ground.
  Updated to Amendment B. New/Modified ESDUpac program.
  Series: Aircraft Noise
  Other collections: Aerospace Package
• 11005 : Prediction of near-field and far-field harmonic noise from subsonic propellers with axial or non-axial inflow
  New/Modified VIEWpac program.
  Series: Vibration and Acoustic Fatigue, Aircraft Noise
  Other collections: Aerospace Package, Aerostructures Package

• MMPDS-2023 Appendices A-E (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): Appendices A-E
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 1 (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 1 - INTRODUCTION
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 2 (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 2 - STEEL ALLOYS
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 3A (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 3A - ALUMINUM ALLOYS - General through 2000 Series
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 3B (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 3B - ALUMINUM ALLOYS - 3000 through 7000 Series
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 3C (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 3C - ALUMINUM ALLOYS - Cast Alloys and Element Properties
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 4 (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 4 - MAGNESIUM ALLOYS
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 5 (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 5 - TITANIUM ALLOYS
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 6 (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 6 - HEAT-RESISTANT ALLOYS
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 7 (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 7 - MISCELLANEOUS ALLOYS AND HYBRID MATERIALS
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 8 (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 8 - STRUCTURAL JOINTS
  New.
  Series: none
  Other collections: MMPDS
• MMPDS-2023 Chapter 9 (since amended ~ see current version) : Metallic Materials Properties Development and Standardization (MMPDS): CHAPTER 9 - GUIDELINES
  New.
  Series: none
  Other collections: MMPDS

• EN2115, new specification
• EN2125, new issue
• EN2127, new issue
• EN2384, new issue
• EN2511, new amendment
• EN2632, new issue
• EN2636, new issue
• EN2952, new specification
• EN3816, new specification
• L59, new amendment
• prEN2073, new specification
• prEN2177, new specification
• prEN2324, new issue
• prEN2383, new specification
• prEN2631, new amendment
• prEN2698, new specification
• prEN3345, new specification
• prEN3452, new specification
• prEN4274, new specification