ESDU A-Z Index: T-TIQ
- Effect of Deflection on Control Hinge Moment Derivatives, AERO C.04.01.08
- Analysis of wind-tunnel data to determine installed tailplane lift-curve slope (Appendix A), 89029
- Average Downwash Angle at Tailplane
- flaps deployed, 97021
- flaps undeployed, 80020
- Calculation of Bending Moment, Loading and Torque on Tailplane in Steady Level Asymmetric Flight
- sideslipping, turning or with failed engine, 01010
- Contribution of Fin and Tailplane Separately to Airframe Noise, 90023
- Deformation of Tailplane in Bending and Twisting Using Assumed Modes, 97032
- Deformation of Tailplane Using Normal Modes, 99033
- Effect of Static Deformation on Tailplane Load Distribution, 96037
- Example of Procedure in Calculation of Effects of Propeller Slipstream on Horizontal Tailplane Flow-field, TM 193
- Lift-Curve Slope for Installed Tailplane in Subcritical Flow
- estimation for fin- or body-mounted, 89029
- Lift-Curve Slope for Isolated Tailplane in Subcritical Flow
- effect of twin fins, 91009
- Viscous Full-potential (VFP) Method for Three Dimensional Wings and Wing-body Combinations
- estimation of excrescence drag at subsonic speeds and analysis program, 23013
- Approximate Estimation for Aeroplanes of Less Than 12 500 lbf Weight to 50 ft
- all forms of propulsion, 82033
- Approximate Estimation of All-Engines-Operating Distance to 35 ft
- multi-engined transport aeroplanes, 76011
- Approximate Estimation of Balanced Field Length for Transport Aeroplanes, 76011
- effect of second-segment climb gradient, 76011
- effect of various levels of deceleration, 76011
- Civil Airworthiness Requirements, 76011, 82033, 85029, 87018
- Detailed Example Calculation Procedure and Results for Typical Transport Aeroplane
- definition of segments and their end points, 87018
- influence of airworthiness requirements on, 87018
- taking account of all factors affecting applied forces and moments, 87018
- Discussion of Decelerating Techniques in Abandoned, 85029
- response times of crew and of mechanical systems, 85029
- thrust decay during turbo-fan and turbo-jet run-down, 85029
- use of reverse thrust, 85029
- Estimation in Phases
- airborne distance, PERF EG5/1
- effect of engine failure on distance, PERF EG5/1
- ground run distance, PERF EG5/1
- Estimation of Thrust Variation With Speed
- Fatigue Loading in Ground Run
-
- see
- Fatigue Loading
- Impingement Drag Due to Tyre Sidespray on Airframe
- Introduction to Data Items on Estimation, 80026
- Prediction of Tyre Sidespray Envelope, 83042
- Reduction of Measured Data, 80009, PERF RG2/1
- Screen
- definition of location for runways with gradient(s), 87018
- Vectored-Jet-Thrust Aircraft
- effect of jet pipe temperature limiter on optimisation, 87037
- optimisation of nozzle angle and speed at nozzle rotation, 87037
- optimisation of proportions of ground and airborne segments, 87037
- presentation of ground and airborne distances non-dimensionally, 87037
- step-by-step trajectory calculation, 87037
- Lubrication Systems
- Wing Tip
-
- see
- Wings
- Isotropic
- Laminated
-
- see
- Delamination
- Airframe Impingement Drag Due to Tyre Sidespray
-
- see
- Impingement Drag
- Tabulated for Various Petroleum Products, 00016
- Estimation From Pressure Distribution, 82018
- Forced Convection Heat Transfer
- duct flow, AERO 00.03.26
- Self-Contained Bearings or Similar Assemblies
- containing concentrated heat sources, 78026, 78027, 78028, 78029, 79002
- Temperature Meet (Cross) Between Streams in Various Types of Two-Stream Heat Exchangers, 98005
- Calculation of Runway Temperature from Ambient Pressure and Ambient Temperature, TM 188
- Considerations in Selecting Appropriate Method
- for gas, liquid, solid or surface, 02006
- Methods Available With Typical Designs, Accuracy, Response, Relative Costs and Applicability
- absorption, emission and line reversal spectroscopy, 02006
- bimetallic thermometer, 02006
- capacitance (permittivity) thermometry, 02006
- crayons, labels, paints, and pellets for peak value indication, 02006
- deforming solids for peak value indication, 02006
- density deduced from refractive index measured by light bending, 02006
- eddy current induced heating monitored through resistance change, 02006
- gas themometry by measuring pressure and/or volume, 02006
- infrared radiation, 02006
- Johnson noise power generated by thermal agitation of electron, 02006
- laser-induced fluorescence, 02006
- liquid in glass thermometer, 02006
- magnetic susceptibility and nuclear resonance thermometry, 02006
- quartz crystal vibration, 02006
- remote sensing of radiation with fibre-optic probes, 02006
- resistance including platinum resistance thermometers, 02006
- scattering (CARS, Raman and Rayleigh), 02006
- semiconductor including diode devices, 02006
- speed of sound measurement, 02006
- thermal imaging, 02006
- thermistors, 02006
- thermochromic liquid crystal colour, 02006
- thermocouples, 02006, 06018
- thermographic phosphor fluorescence, 02006
- Effect on Fatigue Limit
- Effect on Fatigue Strength
- see
- Accelerometers
- Acoustic Fatigue
- Adhesives for Bonded Joints
- Aircraft Performance Analysis
- Aircraft Performance Reduction
- Ambient Temperature
- Axes Systems in Aircraft Dynamics and Performance
- Dynamical Similarity
- Failure Criteria
- Flight Testing
- Flowmetering Devices
- Helicopter Performance Analysis
- Materials Properties
- Non-Destructive Examination
- Parameter Identification
- Platinum Resistance Thermometers
- Standard Fatigue Loading Sequences
- Statistics
- Temperature Measurement
- Thermistors
- Thermocouples
- Viscometers
- Wind-Tunnel Corrections for Aerofoils
- Wind-Tunnel Corrections for Bluff or Quasi-Streamlined Bodies
- Wind-Tunnel Corrections for Wings
- Wind-Tunnel Testing
- see
- Runways
- see also
- Refractory Lining Materials
- Definition, 89022
- Internal Flow
- annular-section ducts, 81045
- coils, 78031
- straight pipes, 92003, 93018, AERO 00.02.05
- Use in Bimetallic Thermometer
- Values of Linear Coefficient for Various Materials
- ceramic, metallic and polymer, 84041
- Definition, 70016
- see also
- Temperature Measurement
- Advantages and Limitations, 02006, 06019
- Cost Relative to that of Other Temperature Measuring Techniques, 02006
- Method of Measuring Resistance, 06019
- Resistance/Temperature Relationship, 02006, 06019
- Response Times, 02006, 06019
- Self-Heating Effects (Dissipation Constant), 06019
- Various Types Available and Dimensions, 02006, 06019
- dimensions and temperature range, 06019
- Use in Temperature Measurement
- see also
- Temperature Measurement
- Accuracy According to Class and Type as Result of Manufacturing Tolerances, 02006
- Advantages and Limitations, 02006, 06018
- Calibration, Problems of Checking and Stability, 06018
- Cost Relative to that of Other Temperature Measuring Techniques, 02006
- Discussion of Use of Compensating or Extension Wires, 02006, 06018
- error correction, 06018
- selection of appropriate materials, 06018
- Explanation of Method of Operation, 02006, 06018
- Glossary, 06018
- Heat Treatment of Wires, 06018
- Installation and Checking, 06018
- International Type Designations, 02006, 06018
- Junction Manufacture, 06018
- Material Selection for Sheath, 06018
- Material Selection for Wires, 02006, 06018
- Reference Devices
- advantages and limitations, 06018
- temperature transposition, 02006, 06018
- Response TImes, 02006
- Sensitivity of Various Materials at Various Temperatures, 02006, 06018
- System Design and Check List, 06018
- Typical Output Characteristics, 02006, 06018
- Use With Data Acquisition Systems, 06018
- Definitions, AERO S.00.03.06
- Basic Concepts, AERO S.00.03.06
- Use on Temperature Measurement
- Selection and Use for Dry Rubbing Bearings
- see also
- Aluminium Alloy Bars and Plates
- Aluminium Alloy Sheets
- Austenitic Stainless Steels
- High Alloy Steels
- High Tensile Low Alloy Steels
- Low Tensile Low Alloy Steels
- Martensitic Stainless Steels
- Precipitation Hardening Stainless Steels
- Titanium Alloy (Ti-10V-2Fe-3Al)
- Titanium Alloy (Ti-4Al-4Mo-2Sn-0.5Si)
- Titanium Alloy (Ti-4Al-4Mo-4Sn-0.5Si)
- Titanium Alloy (Ti-6Al-4V)
- Pressure Drop Across, 69022
- see also
- Dry Rubbing Bearings
- Ball, Cylindrical or Needle Rolling Element
- Fixed-Inclined-Pad Hydrodynamic
- analysis of performance of existing design, 82029, 92034
- choice of pad rise, 82029, 92034
- determination of churning loss, 82029, 92034
- determination of effective film and pad maximum temperatures, 82029, 92034
- determination of film power loss and film thickness, 82029, 92034
- determination of lubricant flow rate, 82029, 92034
- effect of start-up requirements on design, 82029, 92034
- initial estimate of dimensions, 82029, 92034
- lubricant feed arrangement, 82029, 92034
- minimum film thickness and effect of misalignment, 82029, 92034
- recommended pad surface finish, 82029, 92034
- Guide to Choice of Type, 67033
- Materials for Hydrodynamic for Industrial Use
- ability to embed particles, 88018
- alloys and forms available, 88018
- causes of contact and effect on life, 88018
- compatibility with counterface material, 88018
- hardness and compatibility with counterface hardness, 88018
- maximum load and operating temperature, 88018
- relative fatigue strength, 88018
- selection procedure to meet operating requirements, 88018
- Tilting-Pad Hydrodynamic
- analysis of performance of existing design, 83004, 92035
- determination of effective film and pad maximum temperatures, 83004, 92035
- determination of film power loss and churning loss, 83004, 92035
- determination of film thickness, 83004, 92035
- determination of lubricant flow rate, 83004, 92035
- effect of start-up requirements on design, 83004, 92035
- initial estimate of dimensions, 83004, 92035
- lubricant feed arrangement, 83004, 92035
- minimum film thickness and effect of misalignment, 83004, 92035
- position of pivot, 83004, 92035
- recommended pad surface finish, 83004, 92035
- see also
- Longitudinal Force
- Windmilling Propellers
- Checklist of Components Affected by Airframe Interference, 85017
- Compatibility of Definition With Drag Definition, 85015, 85017
- Decrement Due to Body Interference With Propeller Flow
- discussion of applicability of prediction method, 86017
- estimation for body with pusher or tractor propeller, 86017
- Definitions
- free-air, net, minimum-body, propulsive, shaft, 85015, 85017
- Discussion of Airframe Interference Effects, 85015, 85017
- induced and profile losses, 85015
- Estimation of Braking, PERF ED1/2
- Estimation of Effect of Small Changes on Level Speed, 86004
- Estimation of Effect of Small Changes on Rate of Climb, 94039
- Estimation of Fixed-Pitch
- effect of forward speed at maximum rotation speed (engine throttled), 83028
- effect of forward speed below speed for maximum rotation speed, 83028
- Estimation of Uninstalled Constant-Speed, 83001
- effect of activity factor, disc loading, and forward and tip speeds, 83001
- effect of aerofoil section, 83001
- note on estimation of installation effects, 83001
- Approximate Relationship Between Design Specific and By-Pass Ratio, 76034
- Compatibility of Definition With Drag Definition, 69006, 81024
- Convergent Nozzle in Altitude Test Facility, TM 189
- Decay After Fuel Supply Cut or Throttle Closure, 85029
- Definitions
- Estimation of Effect of Small Changes on Level Speed, 86004
- Estimation of Effect of Small Changes on Rate of Climb, 94039
- Estimation of Variation With Speed During Take-Off
- effect of ambient conditions, control laws and flat rating, 76034
- effect of intake total pressure loss, 77001
- mixed flow low by-pass and turbo-jet engines with or without reheat, 76034
- unmixed flow engines, 76034
- Interference of Underwing Jet Efflux With Multi-Slotted Flap
- estimation of decrement due to, 82034
- Measurement in Flight
- curves for use in, 69008
- gas generator and rake traverse methods, 69007
- introduction to Data Items on, 69006
- static pressure or total head sampling methods, 69007
- Nozzle
- compressible flow equations and curves, 67035, 69008, 81004
- Reverse
- discussion of use to decelerate aircraft, 85029
- Thrust-drag accounting from flight test data
- see also
- Extreme Wind Speeds
- Discussion of Origin and Characteristics, 87034
- see
- Wings