ESDU A-Z Index: S-SHH
- Description, 70016
- see
- Sea Water
- Heat Treatment
- see also
- Aqueous Solutions
- Sea Water
- Effect on Fatigue Crack Propagation Rate
- aluminium alloy plate and sheet, 88007
- aluminium-lithium alloy plate, 91015
- high tensile low alloy steels, 93033
- titanium and titanium alloy sheet, 90028
- Effect on Fatigue Crack Propagation Rate (Short Cracks)
- high tensile low alloy steels, 93033
- Effect on Fatigue Strength of Transverse Welds in Aluminium Alloys, 19004
- see
- Statistics
- Equivalent
-
- see
- Roughness
- Dynamic Response
- effect of bevelled edge on natural frequency, 85037
- Dynamic Response to Excitation
-
- see also
- Noise
- Response of Lightweight Structures
- effect of bevelled edge on response to acoustic loading, 86024, 95026
- surface strain due to acoustic loading at mid-point of longer side, 95026
- surface strain ratio due to acoustic loading at centre of faceplates, 95026
- Edge Fixing Design
- considerations for resistance to acoustic fatigue, 86025
- Modal Density, Effect Of
- faceplate bending stiffness, 11008
- orthotropic shear flexibility, 11008
- rotary inertia, 11008
- Testing Endurance by Simulated Acoustic Loading Applied to Representative Element
-
- see
- Acoustic Fatigue
- Transverse (Through-Thickness) Shear Stiffness
- corrugated core, STRUCT 07.03.01
- experimental method of determination, 66025
- hexagonal core, 67022
- program to compute (with isotropic or laminated faceplates), 89013
- Under Local Normal Load
- core compression and shear stresses, 73025
- Diesel Engine, and Gas and Steam Turbines, 89001
- Representation by Describing Functions
- analysis of nonlinear systems, 84009
- Absorption or Emission of Radiation by Atoms or Molecules
- Aerofoils in Transonic Flow, 90008
- see
- Intakes
- Spillage Drag
- Pressure Drop Across in Internal Flow
- Used in Definition of Airborne Distance in Take-Off
- location for runways with gradient(s), 87018
- see also
- Bolted Joints
- Inside Straight Pipes
- Steel
- effect of inclination of nut seating on fatigue strength, 67034
- static strength under axial load, 67019
- surface treatments to improve fatigue strength, 89031
- Steel, Greater Than 1.0 Inch Diameter
- effect of manufacturing process on fatigue strength, 68045, 80028
- fatigue strength under axial load for buttress and V-threads, 80028
- fatigue strength under axial load for Unified threads, 68045, 80028
- fatigue strength under axial load for Whitworth threads, 68045, 80028
- Steel, up to 1.0 Inch Diameter
- effect of manufacturing process on fatigue strength, 67020, 84037
- effect of material tensile strength on fatigue strength, 84037
- effect of mean stress on fatigue strength, 84037
- effect of thread form and thread root radius on fatigue strength, 67020
- fatigue strength under axial load, 67020, 84037
- Titanium Alloy Cold Rolled
- effect of alloy composition and heat treatment on fatigue strength, 83012
- effect of size on fatigue strength, 83012
- effect of temperature on fatigue strength, 83012
- effect of zinc plating on fatigue strength, 83012
- fatigue strength under axial load, 83012
- Area Distribution, AERO A.02.03.02
- Nose or Tail Radius of Curvature, 77028
- Planform Area and Its Centroid, 77028
- Surface Area, 77028
- Volume, 77028
- see also
- Aqueous Solutions
- Salt Water
- Composition, 77024
- Definition of Chlorinity and Salinity, 77024
- Density
- variation with salinity and temperature, 77024
- Dynamic Viscosity
- variation with salinity and temperature, 77024
- variation with temperature, 66024
- Effect on Fatigue Crack Propagation Rate
- aluminium alloy forgings, plates and sheet, 88007
- high tensile low alloy steels, 93033
- Effect on Fatigue Crack Propagation Rate (Short Cracks)
- high tensile low alloy steels, 93033
- Effect on Fretting Fatigue of Aluminium Alloys, 89004
- Prandtl Number
- variation with salinity and temperature, 77024
- Source of Fouling in Cooling Water Systems, 88024
- Specific Heat Capacity at Constant Pressure
- variation with salinity and temperature, 77024
- Thermal Conductivity
- variation with salinity and temperature, 77024
- Subcritical Inviscid Flow
- velocity distribution on aerofoils, 72025
- Supersonic Flow
- velocity distribution on bodies, AERO B.S.02.03.01
- velocity distribution on wings, AERO W.S.00.03.03
- Equilibrium Temperature Rise Estimation
- approximate prediction method, 78027
- discussion of modelling process and identification of heat paths, 97019
- estimation of heat transfer and joint conductance, 78029
- estimation of thermal resistance, 78028
- guidance on coefficient of friction, 78027
- introduction to prediction method, 78026
- methods of reducing, 78026
- program for calculation using thermal network model, 97019
- worked example calculations, 79002
- Worked Examples of Use of Prediction Method for Temperature Rise
- application to dry rubbing bearings, 79002
- application to plummer block assemblies, 79002, 97019
- application to rolling element bearings, 79002, 97019
- approximate application to ring-oiled and other journal bearings, 79002, 97019
- Use in Temperature Measurement
- see also
- Flat Plates
- Description, 70016
- For Fatigue Calculations, 75022
- Notched Specimens, FAT A.00.02
- Unnotched Specimens, FAT A.00.01
- see
- Flow Separation
- see also
- Control Systems
- Feedback
- Linear Systems
- see also
- Rotors
- Deflections and Slopes Due to Point and/or Distributed Loads, and/or Moments, 69017
- Heat Transfer
-
- see
- Heat Transfer
- Position in Journal Bearings
-
- see
- Journal Bearings
- Splined
- Strength Analysis
- Stress Concentration in Fillets, Grooves, Holes and Splines
-
- see
- Circular Holes in Round Rods and Tubes
- Fillets in Round Rods and Tubes
- Fillets of Double Radius in Round Rods and Tubes
- Grooves of Flat-Bottomed Section in Rods
- Grooves of Flat-Bottomed Section Inside or Outside Tubes
- Grooves of U-Section in Rods
- Grooves of U-Section Inside or Outside Tubes
- Splined Steel Shaft Assemblies
- Surface Treatments of Steel to Improve Fatigue Strength, 89031
- With Interference-Fit Collars
- see also
- Shafts
- Coefficient of Friction for Steel Assemblies, 68002
- Design Procedure, 68002
- Discussion of Fatigue Performance and Its Improvement, 68002
- Effect of Surface Treatment on Fatigue Performance, 68002
- Elastic Interface Pressures and Stresses, 68003
- three or more elements, 68004
- Fatigue Strength of Plain Shafts, 68005
- Slipping Load and Torque
- for parallel shaft, 68002
- for tapered shaft, 68002
- see also
- Shafts
- Crack Initiation and Propagation, 86028
- Design of Keyway to Reduce Stress Concentration, 15004, 86028
- Fatigue Strength of Steel in Torsion
- with loaded key compared with plain shaft, 86028
- without key compared with plain shaft, 86028
- Fatigue Strength of Steel Under Bending
- without key, 86028
- Stress Concentration in Bending, 15004, 86028
- Stress Concentration in Combined Bending and Torsion, 15004
- Stress Concentration in Torsion, 15004
- with loaded key, 86028
- Description, 73004
- Introduction, STRUCT 00.06.00
- Beams of Various Sections
- effect on profile drag and sideforce, 82007
- Circular-Section Cylinders (Parallel-Sided, Stepped or Tapered)
- effect on local and overall overturning moment, 81017
- effect on local and overall profile drag, 81017
- effect on local pressures, 81017
- Double-Wedge Section Cylinders With Edge Aligned Symmetrically and Normal to Flow
- effect on overturning moment and profile drag, 79026
- Elliptical-Section Cylinders Normal to Flow
- effect on overturning moment, profile drag and sideforce, 79026
- Flat Plates
- effect on normal force, 70015
- Frameworks of Flat-Sided and/or Tubular Members
- effect on overturning moment, profile drag and sideforce, 81027
- Lattice Towers of Flat-Sided and/or Tubular Members
- effect on profile drag and sideforce, 81028
- Multiple Parallel Frameworks of Flat-Sided and/or Tubular Members
- effect on profile drag and sideforce, 81027
- Multi-Sided Circular-Section Cylinders With Edge Aligned Symmetrically and Normal to Flow
- effect on overturning moment and profile drag, 79026
- Multi-Sided Elliptical-Section Cylinders With Edge Aligned Symmetrically and Normal to Flow
- effect on overturning moment and profile drag, 79026
- Paraboloidal Antennas
- effect on profile drag, rotational moment and sideforce, 82031
- Rectangular-Section Cylinders Normal to Flow
- effect on axial force, profile drag and sideforce, 80003
- effect on overturning and torsional moments, 80003
- Square-Section Cylinders Normal to Flow
- effect on axial force, profile drag and sideforce, 80003
- effect on overturning and torsional moments, 80003
- Square-Section Cylinders With Edge Rounding Normal to Flow
- effect on overturning moment and profile drag, 79026
- Triangular-Section Cylinders With Edge Aligned Symmetrically and Normal to Flow
- effect on overturning moment and profile drag, 79026
- Triangular-Section Cylinders With Face Normal to Flow
- effect on overturning moment and profile drag, 79026
- Calculation for Aircraft in Steady Symmetric Manoeuvres
- fuselage and straight or swept medium to high aspect ratio wing, 94045
- Various Piping Materials, 83046
- Values for Various Metallic Materials
- aluminium, magnesium and titanium alloys, and nickel steels and steels 00932 (MMDH)
- see also
- Corrugated Plates
- Flat Panels in General
- Flat Panels with Transverse Stiffeners
- Flat Rectangular Plates
- Flat Sandwich Panels (Cores of Negligible Flexural Stiffness)
- Flat Sandwich Panels (Corrugated Cores)
- Flat Sandwich Panels (Truss Cores)
- Flat Specially-Orthotropic Rectangular Plates
- Flat Square Plates with Central Circular Hole
- Flat Square Plates with Central Flanged Circular Hole
- Flexibility (and Stiffness) of Various Forms
- for use in finite element calculation, 84042
- see
- Curved Panels
- Flat Panels in General
- Flat Panels with Fibre-Reinforced Unflanged Integral Stiffeners
- Flat Panels with Flanged Integral Stiffeners
- Flat Panels with Lipped or Unlipped Z-Section Stiffeners
- Flat Panels with Top-Hat Section Stiffeners
- Flat Panels with Transverse Stiffeners
- Flat Panels with T-Section Integral Stiffeners
- Flat Panels with Unflanged Integral Stiffeners
- Flat Panels with Unlipped Z-Section Stiffeners
- Flat Parallelogram Panels
- Response of Lightweight Structures
- Skin-Rib Joints in Aluminium Alloys
- Skin-Rib Joints in Composite Structures
- Skin-Rib Joints in General
- Skin-Rib Joints in Titanium Alloys
- see also
- Condensers
- Forced Convection Heat Transfer
- Fouling
- Fouling in Combustion Plant
- Fouling in Cooling Water Systems
- Fouling in Crude Oil Distillation Plant
- Free Convection Heat Transfer
- Heat Exchangers
- Mixed Forced-Free Convection Heat Transfer
- Pressure Drop Across Tube Banks
- Pressure Drop in Internal Flow
- Roughness
- Approximate Relationship Between Tube Count and Shell Diameter, 97007
- Baffled Shellside E- and J-Shells
- calculation of flow distribution, heat transfer and pressure drop, 83038
- Calculation of Approximate Capital Cost, 97007
- Condenser With Shellside Downflow
- calculation method for heat transfer and pressure drop, 84023
- calculation of required surface area, 84023
- flooding limit, 84023
- flow distribution at vapour inlet, 84023
- sizing outlet nozzle, 84023
- Debottlenecking Using Program REVISE
- Design Program (EXPRESS) for Rapid Direct Determination of Performance
- assessing effect of operation at off-design conditions, 00042
- assessing effect of uncertainty in design conditions, 00042
- avoiding crude oil fouling by staying below threshold for, 00016, 00042
- conditions for optimum (using available pressure drop), 00042
- effect of baffle cut, geometry, and shell type, 00042
- effect of flowrate on outlet temperatures, 00042
- effect of operating conditions as fraction of design on outlet temperatures, 00042
- effect of rate of fouling on outlet temperatures, 00042
- guide to use of program EXPRESS, 00042
- thermal duty and pressure drop plotted against tybe count and length, 00016, 00042
- Detailed Cost Data for Various Fluids as Function of Heat Load and Operating Pressure, 92013
- effect of shell type, length/diameter, material, tube diameter, and fluid pressure, 94042
- use in selection of heat exchanger type for given duty, 92013
- Enhancement of Performance by Added Roughness
- E-Shells in Series/Parallel Arrangements With Various Numbers of Shells
- charts of thermal effectiveness for design/performance rating, 98005
- maximum heat transfer effectiveness, 98004, 98005
- prediction of temperature meet (cross) between streams, 98005
- E-Shells in Series With Various Numbers of Shells
- charts of thermal effectiveness for design/performance rating, 98005
- maximum heat transfer effectiveness, 98004, 98005
- prediction of temperature meet (cross) between streams, 98005
- E-Shell With Co- or Counter-Current Flow and Various Numbers of Baffles
- charts of thermal effectiveness for design/performance rating, 98005
- maximum heat transfer effectiveness, 98004, 98005
- prediction of temperature meet (cross) between streams, 98005
- E-Shell With Co- or Counter-Current Flow and Various Numbers of Tube Passes
- charts of thermal effectiveness for design/performance rating, 98005
- maximum heat transfer effectiveness, 98004, 98005
- prediction of temperature meet (cross) between streams, 98005
- F-Shells With Even Number of Passes and Heat Transfer Across Longitudinal Baffle
- charts of thermal effectiveness for design and performance rating, 98005
- maximum heat transfer effectiveness, 98004, 98005
- G-Shells With Two Passes
- charts of thermal effectiveness for design/performance rating, 98005
- maximum heat transfer effectiveness, 98005
- prediction of temperature meet (cross) between streams, 98004
- J-Shells With Co- or Counter-Current Flow and Various Numbers of Baffles
- charts of thermal effectiveness for design/performance rating, 98005
- maximum heat transfer effectiveness, 98004, 98005
- prediction of temperature meet (cross) between streams, 98005
- J-Shells With One or Two Passes in Series
- charts of thermal effectiveness for design/performance rating, 98005
- maximum heat transfer effectiveness, 98005
- prediction of temperature meet (cross) between streams, 98005
- Modification Program (REVISE) for Rapid Determination of Changes From Initial Performance
- Network Design Using Process Integration
- program to optimise utility use and costs, 00043
- Prediction of Acoustic Resonance for In-Line and Staggered Tube Banks, 88028
- acoustic damping for suppression of resonance, 88028
- acoustic Strouhal number, 88028
- isobars and modes for circular duct, 88028
- types of potential damage from, 88028
- typical wave form in rectangular, 88028
- use of deresonating baffles or other solution methods, 88028
- Retrofitting to Network
- Revamping Using Program REVISE
- TEMA Fouling Factors, 00016
- Use of Tube Inserts in Debottlenecking and Revamping, 00041, 97007
- Use of Tube Inserts in Design, 00041, 97007
-
- see also
- Forced Convection Heat Transfer
- calculation of capital cost with or without, 00041, 97007
- guide to use of program ENTRANS, 00041
- improving controllability and flexibility of operation, 00041, 97007
- inlet and outlet film temperatures with or without, 00041, 97007
- keeping within maximum shell length and diameter, 00041, 97007
- making best use of available pressure drop, 00041, 97007
- possible mitigation of fouling, 00016, 00041, 97007
- reducing length, and number of passes and shells, 00041, 97007
- situations in which use of inserts is inappropriate, 97007
- tubeside heat transfer for twisted tapes, 95027
- tubeside heat transfer for various types including twisted tapes, 97007
- tubeside pressure drop for twisted tapes, 95027
- tubeside pressure drop for various types including twisted tapes, 00041, 97007
- Vibration
- effect of buffeting on wear and life, 87019
- mechanisms causing and methods of reducing risk, 87019
- prediction of damping in gas or liquid flows, 87019
- prediction of fluidelastic instability and of natural frequency of tubes and U-tubes, 87019
- response to wake shedding, 87019
- see also
- Circular Frames Supported By A Shell
- Cylinders of Circular Section (Strength and Vibration)
- Cylinders of Circular Section with Flat Ends
- Cylinders of Circular Section with Torispherical Ends
- Cylinders of Elliptical Section
- Cylinders of Laminated Construction
- Spherical Shells of Laminated Construction
- Dynamic Response to Excitation Above Ring Frequency
- equation for coupling loss factor for connected, 98020, 99009
- equation for modal density in bending, 99009
- Reinforced Symmetrical
- bending moment for given maximum panel strain, STRUCT 00.06.01
- stress distribution for given bending moment, STRUCT 00.06.01