ESDU A-Z Index: CI-COM
- see
- Afterbody
- Shear Centre, STRUCT 00.06.04
- Introduction to Data Items on, STRUCT 03.06.00
- Under Concentrated Loads and Couples
- bending moments, STRUCT 03.06.01
- direct forces, STRUCT 03.06.02
- radial deflections, STRUCT 03.06.04
- shear forces, STRUCT 03.06.03
- Equations for Deflections and Forces Due to Applied Concentrated Couples and Loads
- angular deflections, 83043
- bending moments, 83043
- direct and shear forces, 83043
- radial and tangential deflections, 83043
- shear flow from shell, 83043
- Graphical Data for Deflections and Forces Due to Applied Concentrated Couples
- angular deflections, STRUCT 03.06.15
- bending moments, STRUCT 03.06.06
- direct forces, STRUCT 03.06.09
- effect of adjacent frames, STRUCT 03.06.17
- effect of shell longitudinal flexibility, STRUCT 03.06.17
- radial and tangential deflections, STRUCT 03.06.15
- shear flow from shell, STRUCT 03.06.16
- shear forces, STRUCT 03.06.12
- Graphical Data for Deflections and Forces Due to Applied Concentrated Radial Loads
- angular deflections, STRUCT 03.06.15
- bending moments, STRUCT 03.06.08
- direct forces, STRUCT 03.06.11
- effect of adjacent frames, STRUCT 03.06.17
- effect of shell longitudinal flexibility, STRUCT 03.06.17
- radial and tangential deflections, STRUCT 03.06.15
- shear flow from shell, STRUCT 03.06.16
- shear forces, STRUCT 03.06.14
- Graphical Data for Deflections and Forces Due to Applied Concentrated Tangential Loads
- angular deflections, STRUCT 03.06.15
- bending moments, STRUCT 03.06.07
- direct forces, STRUCT 03.06.10
- effect of adjacent frames, STRUCT 03.06.17
- effect of shell longitudinal flexibility, STRUCT 03.06.17
- radial and tangential deflections, STRUCT 03.06.15
- shear flow from shell, STRUCT 03.06.16
- shear forces, STRUCT 03.06.13
- Aerodynamic Characteristics
-
- see
- Excrescences
- Stress Analysis
- Biaxial Loading
- stress concentration factors for circular and optimised shape holes in large plates, 15005
- Effect of Buckling in Shear
- Loaded Through a Pin
- stress concentration factor distribution along bore, 93030
- Under Out-of-Plane Bending
- stress concentration factor distribution along bore, 93030
- Uniaxial Loading
- stress concentration factors for circular and optimised shape holes in finite plates, 15005
- stress concentration factors for circular and optimised shape holes in large plates, 15005
- stress decay from hole edge transverse to loading direction, 85045
- Various In-Plane Loadings
- stress concentration factors for single hole, 09014, 80027, 93030
- stress concentration factors for two holes, 67023, 75007, 85045
- see also
- Flat Plates
- Skin-Rib Joints
- effect on fatigue strength under acoustic loading, 72015
- Effect on Fatigue Strength of Joints
- discussion of benefit due to proportion of shear transmitted by friction, 70018
- Loaded Pins in Wide Flat Plates
- stress intensity factors for hole corner cracks, 83033
- Definition and Use in Specifying Take-Off Distance Available, 87018
- Critical attachment loads of cleats (clips), 14006
- Elastic analysis of cleats (clips), 14006
- Experimental and theoretical comparison of cleat strength, 14006
- Experimental and theoretical comparison of clip strength, 14006
- Experimental strength of cleats (clips), 14006
- Formed angle sheet in metal cleats (clips), 14006
- Good design practice of cleats (clips), 14006
- Machined angle sheet in metal cleats (clips), 14006
- Plastic analysis of cleats (clips), 14006
- Theory for shear cleats (clips), 14006
- see
- Wings
- Definition, 71003
- Transmitting Tension Between Angle Sections
- avoidance of separation under load, 84039
- calculation of maximum bending moments, 84039
- comparison of test data with prediction, 84039
- effect of plastic hinges on load capacity, 84039
- failure types, 84039
- methods of idealisation for strength analysis, 84039
- possible designs and design guidance, 84039
- practical worked examples of strength analysis, 84039
- see
- Viscometers
- Pressure Change Prediction in Pipeline Due to Closure
- Pressure Drop Across, 69022
- see
- Frequency
- Advantages and Limitations as Method of Fatigue Strength Improvement in Steels, 89031
- comparison with other possible surface treatments, 89031
- Effect on Fatigue Limit Reduction of Steel Due to Chromium Plating, 86033
- Effect on Fatigue Strength of Plain Shafts With Interference-Fit Collars, 68005
- Effect on Fatigue Strength of Steel Screw Threads, 67020, 68045, 80028, 84037
- Mechanism of Fatigue Strength Improvement, 89031
- Combining Spectra Levels, 08018
- Use of Process Integration
- to select and place utilities, 89001
- Fouling, Slagging and Its Control
- Turbo-Jet Engines
- specific heat capacity ratio, 69008
- see
- Heat Exchangers
- Beams of Sandwich Construction With Specially-Orthotropic or Unbalanced Faceplates
- program for prediction of faceplate wrinkling, 87013
- Considerations in Design Against Acoustic Fatigue, 86025
- Corner Section Under Bending Moment, Radial Shear and Tangential Direct Load
- loading to cause failure, 94019
- prediction of failure in ply material or at ply interfaces, 94019
- through-thickness radial and shear stresses, 94019
- Criteria for Failure of Individual Lamina Under In-Plane Loading
- applications and limitations of various, 83014
- comparison of various with experimental results, 83014
- expressions for and graphs of various, 83014
- strength testing methods to obtain input data for, 83014
- Criterion for Edge Delamination Failure, 95028
- Criterion for Failure Through Thickness
- in ply material or at ply interfaces, 94019
- Curved Rectangular Specially-Orthotropic Plates
- program for buckling stress (biaxial and pressure loads), 94007
- program for natural frequencies with uniform in-plane biaxial loading, 89011
- program for stress response to acoustic loading, 84008
- Dynamic Response
- Flat Laminated Plates Under Uniaxial Strain and Subjected to Temperature Change
- program for estimation of interlaminar stresses at free edges, 95028
- use of interlaminar stresses at free edges to predict delamination, 95028
- Flat Panels With Fibre-Reinforced Unflanged Integral Stiffeners
- local buckling stress under biaxial compression, 73015
- Flat Rectangular Orthotropic Plates With Simply-Supported Edges
- design curves for radiation efficiency averaged in one-third octave bands, 02009
- program for averaged radiation efficiency, 02009
- use of averaged radiation efficiency to calculate sound radiation, 02009
- Flat Rectangular Plates Under All Combinations of Biaxial Loading and Shear
- program for buckling stress for various edge conditions, 81047, 94005
- Flat Rectangular Specially-Orthotropic Plates
- program for natural frequencies, 83036
- program for natural frequencies with uniform in-plane biaxial loading and shear, 90016, TM 71
- program for stress response to acoustic loading, 84008
- Flat Rectangular Specially-Orthotropic Plates Under All Combinations of Biaxial Loading and Shear
- program for buckling stress for various edge conditions, 80023, 81047, 94005
- Flat Rectangular Specially-Orthotropic Plates Under In-Plane Loads and Bending Moments
- choice of most effective ply thicknesses and lay-up, 96036
- Flat Rectangular Specially-Orthotropic Plates Under Normal Pressure
- program for deflections, in-plane moments, forces, stresses, strains, 93011
- Flat Rectangular Unbalanced Plates Under Biaxial Loading
- program for buckling stress for simply-supported edges, 94006
- Flat Square Specially-Orthotropic Plates
- program for natural frequencies with uniform in-plane biaxial loading and shear, 90016, TM 71
- Flat Square Specially-Orthotropic Plates Under All Combinations of Biaxial Loading and Shear
- program for buckling stress for various edge conditions, 80023, 81047, 94005
- Flat Square Specially-Orthotropic Plates Under Normal Pressure
- program for deflections, in-plane moments, forces, stresses, strains, 93011
- Flat Strips
- stiffness under biaxial compression with distributed edge couples, 73007
- Laminated Plates Tapered in Thickness by Ply Drop-Off
- program to predict uniaxial load for delamination, 91003
- use of fracture mechanics to predict delamination, 91003
- Laminates
- calculation of elastic constants and stiffnesses, 83035, 94003
- calculation of strains in layers due to external loads and thermal effects, 94004
- calculation of stresses in layers due to external loads and thermal effects, 94004
- curvatures and strains due to external loads and thermal effects, 94004
- damage due to thermal loads, 84018
- damage in unbalanced due to holding flat, 84018
- fatigue strength of aluminium-glass fibre epoxy (GLARE) under acoustic loading, 84027
- fatigue strength of carbon fibre-epoxy under acoustic loading, 84027
- formulae for transforming stress and strain values between axes systems, 94003
- program for damping, 85012
- program for elastic constants and stiffnesses, 83035
- program to compute through-thickness shear stiffnesses, 89013
- program to predict layer failure history, 84018
- stacking sequences for special orthotropy, 82013
- stiffnesses related to any reference plane in terms of those related to central plane, 94003
- values of specific damping capacity for fibre-reinforced, 85012
- Modes of Failure in Multidirectional Laminate
-
- see also
- Delamination
- discussion and illustration of modes due to in-plane loading, 82025
- Modes of Failure in Unidirectional Laminate
- discussion and illustration of all modes, 82025
- Program to Compute Stress and Strain Around Circular Hole, 85001
- use to design reinforcement in fibre-reinforced composites, 86003
- Program to Design Most Effective Laminate to Support In-Plane Loads and Bending Moments
- choice of ply thicknesses and lay-up using 0?, 90?, ?45? layers only, 96036
- Sandwich Panels With Laminated Faceplates
- program to compute through-thickness shear stiffnesses, 89013
- Sandwich Panels With Orthotropic Faceplates
- program for lower natural frequencies (bending modes), 86024
- program for natural frequencies, 85037
- program for strain response to acoustic loading, 86024
- Sandwich Panels With Specially-Orthotropic or Unbalanced Faceplates
- program for prediction of faceplate wrinkling, 88015
- Skin-Rib Joints in Bonded or Riveted Fibre Reinforced
- fatigue strength under acoustic loading, 84027
- Stacking Sequences for Special Orthotropy, 82013
- selection to meet stiffness criteria, 82013
- stiffness matrices for laminates, 82013
- Structural Damping
- discussion of effect of fibre angle, length and volume, and temperature, 91012
- typical values, 91012
- Struts of Sandwich Construction With Specially-Orthotropic or Unbalanced Faceplates
- program for prediction of faceplate wrinkling, 87013
- Testing Endurance by Simulated Acoustic Loading Applied to Representative Element
-
- see
- Acoustic Fatigue
- Unbalanced Plates
- discussion of effect of coupling on buckling behaviour, 94006
- program for buckling stress under biaxial loading of rectangular simply-supported, 94006
- types of stiffness coupling, 94003
- see
- Air