ESDU A-Z Index: TIR-TQ

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

| t-tiq | TIR-TQ | tr-tz |

Tires
see
Aircraft Tyres
Tyre-Ground Contact Area
Titanium
see also
Titanium Alloys
Titanium Sheets
Effect of Fretting on Fatigue Strength, 88027
Titanium Alloy (Commercially Pure)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading for Bar or Sheet, 19001
effect of notches, 19001
Fatigue Strength Under Bending for Sheet, 19001
effect of notches, 19001
Titanium Alloys
see also
Fretting Fatigue
Lugs (Fatigue Strength)
Materials Properties
Screw Threads
Skin-Rib Joints in Titanium Alloys
Titanium Alloy (Ti-10V-2Fe-3Al)
Titanium Alloy (Ti-11Sn-5Zr-2Al-1Mo)
Titanium Alloy (Ti-2.5Cu)
Titanium Alloy (Ti-4Al-3Mo-1v)
Titanium Alloy (Ti-4Al-4Mo-2Sn-0.5Si)
Titanium Alloy (Ti-4Al-4Mo-4Sn-0.5Si)
Titanium Alloy (Ti-5Al-2.5Sn)
Titanium Alloy (Ti-6Al-2Sn-2Zr-2Mo)
Titanium Alloy (Ti-6Al-2Sn-4Zr-2Mo)
Titanium Alloy (Ti-6Al-2Sn-4Zr-6Mo)
Titanium Alloy (Ti-6Al-4V)
Titanium Alloy (Ti-6Al-5Zr-0.5Mo-0.25Si)
Titanium Alloy (Ti-6Al-6V-2Sn)
Titanium Alloy (Ti-8Al-1Mo-1V)
Bearing, Torsion and Shear Strength 00932 (MMDH)
Composition of Specific Specifications 00932 (MMDH)
Corrosion Resistance 00932 (MMDH)
Creep Behaviour and Elongation 00932 (MMDH)
Cyclic Stress-Strain Curves, 11003
Density 00932 (MMDH)
Elastic Moduli 00932 (MMDH)
Electrical Conductivity 00932 (MMDH)
Exfoliation Corrosion Resistance 00932 (MMDH)
Fatigue Crack Propagation Rate (Short Cracks), 92023
summary of available data, 23012
Fracture Toughness 00932 (MMDH)
Generalised Stress-Strain Curves, 76016
program to compute from modulus and two inelastic points, 89052
Poisson's Ratio 00932 (MMDH)
Proof Stresses in Compression 00932 (MMDH), 76016
Proof Stresses in Tension 00932 (MMDH)
Specific Heat Capacity 00932 (MMDH)
Strain-Life Data, 11003
Stress Corrosion Resistance 00932 (MMDH)
Tensile Strength 00932 (MMDH)
Thermal Conductivity 00932 (MMDH)
Thermal Expansion Coefficient 00932 (MMDH)
Weldability 00932 (MMDH)
Titanium Alloy (Ti-10V-2Fe-3Al)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Bar, 82015
characteristic slopes of plots against stress intensity factor, 82015
effect of heat treatment and microstructure, 82015
summary of available data, 23012
Fatigue Strength Under Axial Loading, 19001
Fatigue Strength Under Bending for Forging, 19001
Threshold Stress Intensity Factor Range, 82015
Titanium Alloy (Ti-10V-2Fe-5Zr-3Al)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading, 19001
Titanium Alloy (Ti-11Sn-5Zr-2Al-1Mo)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Bar, 82015
summary of available data, 23012
Titanium Alloy (Ti-120)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading, 19001
Titanium Alloy (Ti-15V-3Cr-3Sn-3Al)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading, 19001
Titanium Alloy (Ti-160)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading, 19001
Titanium Alloy (Ti-2.5Cu)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Sheet, 89051, 90028
characteristic slopes of plots against stress intensity factor, 89051, 90028
effect of corrosive and other environments, 90028
effect of loading frequency, 90028
effect of mean stress (or stress ratio), 89051
summary of available data, 23012
Titanium Alloy (Ti-3Al-2V)
see also
Titanium Alloys
Fatigue Strength Under Bending for bar, 19001
Titanium Alloy (Ti-3Al-5Cr)
see also
Titanium Alloys
Fatigue Strength Under Bending for Rod, 19001
Titanium Alloy (Ti-3Al-8V-6Cr-4Mo-4Zr)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading, 19001
Titanium Alloy (Ti-3Mn Complex)
see also
Titanium Alloys
Fatigue Strength Under Bending for Rod, 19001
Titanium Alloy (Ti-4Al-3Mo-1v)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Sheet
characteristic slopes of plots against stress intensity factor, 89051
summary of available data, 23012
Fatigue Strength Under Axial Loading for Sheet, 19001
Titanium Alloy (Ti-4Al-4Mn)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading, 19001
effect of notches, 19001
Fatigue Strength Under Bending for Bar or Rod, 19001
effect of notches, 19001
Fatigue Strength Under Bending for Cast Form,, 19001
Titanium Alloy (Ti-4Al-4Mo-2Sn-0.5Si)
see also
Titanium Alloys
Effect of Fretting on Fatigue Strength, 88027
Fatigue Crack Propagation Rate for Bar, 82015
characteristic slopes of plots against stress intensity factor, 82015
effect of mean stress (or stress ratio), 82015
summary of available data, 23012
Fatigue Strength Under Bending for Bar, 19001
effect of notches, 19001
Threshold Stress Intensity Factor Range for Bar, 82015
Titanium Alloy (Ti-4Al-4Mo-4Sn-0.5Si)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Bar, 82015
summary of available data, 23012
Threshold Stress Intensity Factor Range for Bar, 82015
Titanium Alloy (Ti-5Al-2.5Sn)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Bar and Forgings, 82015
characteristic slopes of plots against stress intensity factor, 82015
effect of mean stress (or stress ratio), 82015
summary of available data, 23012
Fatigue Crack Propagation Rate for Sheet
characteristic slopes of plots against stress intensity factor, 89051
effect of mean stress (or stress ratio), 89051
summary of available data, 23012
Fatigue Strength Under Axial Loading for Bar or Sheet, 19001
effect of notches, 19001
Fatigue Strength Under Axial Loading for Cast Form, 19001
effect of notches, 19001
Fatigue Strength Under Bending for Sheet, 19001
effect of notches, 19001
Titanium Alloy (Ti-6Al-2Mo-4Zr-2Sn)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading for Bar, 19001
Titanium Alloy (Ti-6Al-2Sn-2Zr-2Mo)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Forgings, 82015
characteristic slopes of plots against stress intensity factor, 82015
summary of available data, 23012
Titanium Alloy (Ti-6Al-2Sn-4Zr-2Mo)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Forgings, 82015
characteristic slopes of plots against stress intensity factor, 82015
summary of available data, 23012
Titanium Alloy (Ti-6Al-2Sn-4Zr-6Mo)
see also
Titanium Alloys
Fatigue Crack Propagation Rate (Short Cracks) for Bars, 92023
summary of available data, 23012
Fatigue Strength of Forgings, 19001
Titanium Alloy (Ti-6Al-4V)
see also
Resistance Curves
Titanium Alloys
Effect of Fretting on Fatigue Strength, 88027
Fatigue Crack Propagation Rate for Bar and Forgings, 82015, 92023
characteristic slopes of plots against stress intensity factor, 82015
effect of heat treatment and microstructure, 82015
effect of mean stress (or stress ratio), 82015
summary of available data, 23012
Fatigue Crack Propagation Rate for Plate, 82015, 90028, 92023
characteristic slopes of plots against stress intensity factor, 82015, 90028
effect of corrosive and other environments, 90028
effect of heat treatment and microstructure, 82015, 90028
effect of loading frequency, 90028
effect of mean stress (or stress ratio), 82015
summary of available data, 23012
Fatigue Crack Propagation Rate for Sheet, 89051, 90028, 92023
characteristic slopes of plots against stress intensity factor, 89051, 90028
effect of corrosive and other environments, 90028
effect of heat treatment, 89051
effect of loading frequency, 90028
effect of mean stress (or stress ratio), 89051
summary of available data, 23012
Fatigue Crack Propagation Rate (Short Cracks) for Bar, 92023
summary of available data, 23012
Fatigue Crack Propagation Rate (Short Cracks) for Plate, 92023
summary of available data, 23012
Fatigue Crack Propagation Rate (Short Cracks) for Sheet, 92023
summary of available data, 23012
Fatigue Strength Improvement Obtained by Shot Peening, 19004
see also
Shot Peening
behaviour with fretting and at elevated temperature, 19004
Fatigue Strength Under Acoustic Loading, 10011
Fatigue Strength Under Axial Loading for Cast Form, 19002
effect of machining, 19002
effect of mean stress, 19002
effect of notches, 19002
effect of shot peening, 19002
Fatigue Strength Under Axial Loading for Extruded Form, 19002
effect of mean stress, 19002
effect of notches, 19002
Fatigue Strength Under Axial Loading or Bending for Bar, Rod or Sheet, 19002
effect of annealing, 19002
effect of mean stress, 19002
effect of notches, 19002
effect of or forging, 19002
effect of solution treatment and age hardening, 19002
Resistance Curves (R-Curves), 20003
Threshold Stress Intensity Factor Range for Bar, Forgings and Plate, 82015
effect of mean stress (or stress ratio), 82015
Titanium Alloy (Ti-6Al-5Zr-0.5Mo-0.25Si)
see also
Titanium Alloys
Effect of Fretting on Fatigue Strength, 88027
Fatigue Crack Propagation Rate for Bar, 82015, 92023
summary of available data, 23012
Fatigue Crack Propagation Rate (Short Cracks) for Bar, 92023
summary of available data, 23012
Titanium Alloy (Ti-6Al-6V-2Sn)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Plate, 82015
characteristic slopes of plots against stress intensity factor, 82015
effect of heat treatment and microstructure, 82015
effect of mean stress (or stress ratio), 82015
summary of available data, 23012
Fatigue Crack Propagation Rate for Sheet, 90028
characteristic slopes of plots against stress intensity factor, 90028
effect of corrosive and other environments, 90028
effect of loading frequency, 90028
summary of available data, 23012
Fatigue Strength Under Axial Loading for Bar or Plate, 19001
effect of mean stress (or stress ratio), 19001
effect of notches, 19001
Fatigue Strength Under Axial Loading for Forgings, 19001
effect of notches, 19001
Titanium Alloy (Ti-8Al-1Mo-1V)
see also
Titanium Alloys
Fatigue Crack Propagation Rate for Plate, 82015, 90028
characteristic slopes of plots against stress intensity factor, 90028
effect of corrosive and other environments, 90028
effect of heat treatment, 90028
effect of loading frequency, 90028
summary of available data, 23012
Fatigue Crack Propagation Rate for Sheet
characteristic slopes of plots against stress intensity factor, 89051
effect of heat treatment, 89051
effect of mean stress (or stress ratio), 89051
effect of thickness, 89051
summary of available data, 23012
Threshold Stress Intensity Factor Range for Plate, 82015
Titanium Alloy (Ti-8Mn)
see also
Titanium Alloys
Fatigue Strength Under Bending for Bar, 19001
Titanium Alloy (Ti-8V-8Mo-2Fe-3Al)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading, 19001
effect of mean stress (or stress ratio), 19001
Titanium Alloy (Timetal 15-3)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading for Cast Form,, 19001
effect of notches, 19001
Fatigue Strength Under Axial Loading for Strip, 19001
effect of mean stress (or stress ratio), 19001
Titanium Alloy (VT23)
see also
Titanium Alloys
Fatigue Strength Under Axial Loading for Bar or Plate, 19001
Titanium Sheets
Fatigue Crack Propagation Rate
characteristic slopes of plots against stress intensity factor, 89051
effect of mean stress (or stress ratio), 89051
summary of available data, 23012
T-Junctions in Ducts
see
Noise in Air-Conditioning Duct Systems
Pressure Drop in Internal Flow
Tolerances
see also
Interference Fit
Bolted Joints
effect of tilted nut seating on fatigue strength of steel screw threads, 67034
effect on load distribution with bolt pretension, 13015, 13016, 85021
Calculation of Effect on a Parameter
of variabilities of component contributions, 91017
Effect on Flexural Buckling of Struts, 88034, 90002, STRUCT 01.01.01
Effect on Locking With Double Lock Nuts, 14002
Effect on Stress Concentration Due to Double Radius Fillets
round rods and tubes, 75033
Toluene
see also
Heat Pipes
Density
pressure and temperature variation for saturated gas and liquid, 80017
Dynamic Viscosity
pressure and temperature variation for saturated gas and liquid, 80017
Specific Heat Capacity
pressure and temperature variation for saturated liquid, 80017
Specific Latent Heat of Vaporisation
pressure and temperature variation at saturation, 80017
Surface Tension
pressure and temperature variation at saturation, 80017
Thermal Conductivity
pressure and temperature variation for saturated liquid, 80017
Vapour Pressure
variation along saturation curve, 80017
Top-Hat Sections
see
Channel Sections with Lips turned outwards
Flat Panels with Top-Hat Section Stiffeners
Planar Shapes and Sections With/without Holes
Struts of Channel Section
Tornadoes
Discussion of Origin and Characteristics, 87034
Torque
Calculation for Aircraft in Steady Level Asymmetric Flight
on fin, tailplane and wing, 01010
Calculation for Swept or Unswept Wing of Medium to High Aspect Ratio
for aircraft in steady symmetric manoeuvres, 94045
Torque in Linkage Drive Shafts
see
Linkages
Reduction of Torque Fluctuation in Linkage Drive Shafts
Torque Limited Brakes
Definition, 16008, 85029
Description, 16008, 85029
Torque Tightening
Use to Pretension Bolted Joints
see
Bolted Joints
Torsional Buckling
see
Struts in General
Struts of Bulb Angle Section
Struts of Thin-Walled Open Section
Struts of Tubular Section
Torsional-Flexural Buckling
Description of Behaviour of Flat Panels Under Compression, 72012
Struts Under Compression
see
Struts in General
Struts of Channel Section
Struts of Thin-Walled Open Section
Torsional Moment on Structures
see also
Aerodynamic Loading
Beams of Angle Section
sources of data for two-dimensional crossflow, 82007
Beams of H-Section
sources of data for two-dimensional crossflow, 82007
Lattice Towers of Flat-Sided and/or Tubular Members, 81028
effect of ancillary components, 81028
Rectangular-Section Cylinders Normal to Flow
effect of incidence in turbulent shear flow, 80003
effect of section aspect ratio in turbulent shear flow, 80003
Square-Section Cylinders Normal to Flow
effect of incidence in turbulent shear flow, 80003
Torsional Vibration
see also
Cylinders of Circular Section (Strength and Vibration)
Dynamic Response of Buildings and Structures to Turbulence and Wind
see
Response of Buildings and Structures To Atmospheric Turbulence
Torsion Constant
see also
Angle Sections with Bulbs
Definition, STRUCT 00.07.00
Total Pressure
see also
Anemometric Data Correction
Behind Normal Shock Wave in Hypersonic Flow
ratio to static pressure, 93020
In Steady, Spatially Non-Uniform Axial Compressible Flow
as part of reference set of average flow properties for calorically-perfect gas, 95011
as part of reference set of average flow properties for thermally-perfect gas, 97029
Isentropic Flow of Calorically Imperfect Diatomic Gas
effect of characteristic vibrational temperature, AERO S.00.01.10
variation with Mach number, AERO S.00.01.10
Isentropic Flow of Perfect Gas
variation with Mach number and specific heat capacity, 74028, AERO S.00.03.06, AERO S.00.03.07
variation with Mach number in air, 69026, 73017, 74028, 82018, AERO 00.03.05
Isentropic Flow of Real Air
variation with Mach and Reynolds numbers, 73017
Measurement of During Flight Testing, 20006
Total Pressure Coefficient
Isentropic Flow of Perfect Air
variation with Mach number, 73017
Isentropic Flow of Perfect Gas
variation with Mach number and specific heat capacity, 74028
Total-Static Pressure Difference
see
Dynamic Pressure
Kinetic Pressure
Total Pressure Coefficient
Total Temperature
In Steady, Spatially Non-Uniform Axial Compressible Flow
as part of reference set of average flow properties for calorically-perfect gas, 95011
as part of reference set of average flow properties for thermally-perfect gas, 97029
Isentropic Flow of Calorically Imperfect Diatomic Gas
effect of characteristic vibrational temperature, AERO S.00.01.10
variation with Mach number, AERO S.00.01.10
Isentropic Flow of Perfect Gas
relation with static temperature, 74028
variation with Mach number and specific heat capacity, 74028, 97017, AERO S.00.03.06, AERO S.00.03.07
variation with Mach number in air, 69026, 74028, AERO 00.03.05
Isentropic Flow of Real Air
variation with Mach and Reynolds numbers, 73017
Touch-Down Speed
see
Landing
Towers of Lattice Construction
Dynamic Response to Turbulence and Wind
see
Response of Buildings and Structures
Response of Buildings and Structures To Atmospheric Turbulence
Mean Forces and Moments Due to Wind
see
Overturning Moment on Surface-Mounted Structures
Profile Drag
Sideforce
Torsional Moment on Structures
Mechanical VIbration Characteristics
see
Buildings
Towers of Non-Lattice (Clad) Construction
Dynamic Response to Turbulence and Wind
see
Response of Buildings and Structures
Response of Buildings and Structures To Atmospheric Turbulence
Response of Buildings and Structures To Vortex Shedding
Mean Forces, Moments and Pressures Due to Wind
see
Axial Force
Base Pressure
Bluff Bodies
Critical Conditions in Fluid Flow
Derivatives
Internal Pressure
Normal Force
Overturning Moment on Surface-Mounted Structures
Pressure Distribution
Profile Drag
Sideforce
Torsional Moment on Structures
Vortex Shedding
Mechanical Vibration Characteristics
see
Buildings

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

| t-tiq | TIR-TQ | tr-tz |